610 inquiries about Cast & Forged

I would send you order.Please send me e-mail address for our order.

  • Cast & Forged
  • Shanghai Matech Machinery Manufacture Corporation Ltd.
Russian Federation
IP : 88.200.137.**
2019-06-03 01:07:48
Contact Info

Hi I want to know if you can make car plastic parts moulds such as bumpers door handles etc. plz quote

  • Cast & Forged
  • Ningbo Hi-Tech Moldie Machinery Co., Ltd.
Pakistan
IP : 210.2.133.**
2019-05-25 13:28:48
Contact Info

Please provide me with more product details. How much for kj66 turbine wheel and ngv? Thanks

  • Cast & Forged
  • J66 KJ66 aircraft turbojet engine turbine wheel and NGV
IP : 107.77.225.**
2019-05-25 01:40:02
Contact Info

Greetings, Can you supply your company's products in a large quantity on contract basis under in Our country inPhilippines the ongoing Tender. If you can, kindly give us your products specification and the unit prices for quotation of quantities with more details. This Tender is open to suppliers whose company's products meet international standards. Terms of Payment: 80% in advance the remaining 20% to be paid before shipment. I am a commission agent. Best Regards

  • Cast & Forged
  • LIBO CASTING INTERNATIONAL LIMITED
IP : 129.205.112.**
2019-05-18 23:56:36
Contact Info

This is Miduk Yoo. I have a question about Chemical analysis service at Matech I want to analyze impurity of chemical, Wafer, DIW etc (I means chemical is PR, Stripper, Developer etc..) so I find you have ICP-MS, IC, Titrator equipment. If i request to analyze metal impurity, anion, cation Can you provide chemical analysis with these equipment(ICP-MS, IC, Titrator)? please reply me Best regards.

  • Cast & Forged
  • Shanghai Matech Machinery Manufacture Corporation Ltd.
South Korea
IP : 61.42.99.**
2019-05-14 15:41:36
Contact Info

Please send me your contact details so I may send you drawings for review as we are looking for a steel casting supply company to manufacture components. Regards steven hague steve.hague@uniquegroup.com 971555130440

United Arab Emirates
IP : 86.98.145.**
2019-05-13 21:03:45
Contact Info

I am from Tisco Ukraine Company. Please share your product catalogue and full contact details, availability of the samples also.

  • Cast & Forged
  • Jiangsu Zhuhong Forging Co., Ltd
Lithuania
IP : 85.206.149.**
2019-05-11 17:24:22
Contact Info

The first providing of 8 pieces is to built a prototype, then we will need sets of 400 pieces, to manufacture fifty 10 foot containers ( the sets must be of 2 top left model, 2 top right model, 2 botoom left and 2 botoom right, each please) We are an argentine metalurgic ( www.prsl.com.com ) My cel phone is +54 9 3329606737 Thanks, regards

  • Cast & Forged
  • Shanghai Matech Machinery Manufacture Corporation Ltd.
IP : 179.42.182.**
2019-05-07 17:51:49
Contact Info

I would send you order.Please send me e-mail address for our order.

  • Cast & Forged
  • Shanghai Matech Machinery Manufacture Corporation Ltd.
Italy
IP : 37.116.154.**
2019-05-05 23:00:05
Contact Info

Good Afternoon My name is George and I am the Director of a company call Countryside Feeders Ltd based in the UK. I am very interested in buying the Automatic Smart Feeder. Please can you give me a quote? Many thanks in advance, Kind Regards George

  • Cast & Forged
  • Ningbo Ningyang Machinery Co., Ltd. ( MTT Department)
United Kingdom
IP : 86.154.39.**
2019-05-02 19:31:22
Contact Info

Please send me more about the product M3174SA

  • Cast & Forged
  • Engine Bearing,Main Bearing,Con Rod Bearing
IP : 105.104.180.**
2019-04-29 22:25:33
Contact Info

Hi Richard, this is Norbert. I’m the general manager of Witzenmann Hamburg from Germany. I’m working on a big project. I’m looking for a company who is able to work on the whole project. We are looking for lost wax casting. Material is 316 ( in best case: 316L). Attached you find the drawing (and the 3D-step file) for the most complicated part. On “Drawing 2 (yellow)” you see the total part and I hope you can cast it in one step. If you can do so, only the yellow marked surfaces have to be machined incl. the M12 threads. If you are not able to cast it, because it is too complicated or too big, I have an alternative: “Drawing 1 (Blue/yellow)“: can you cast the „blue“ area: means: everything above and incl. the flat plate, and only 50 mm long pipes in the give diameter below the plates. The machining is then only on the yellow marked surfaces and the M12 threads. Below the plate the “pipes” have also to be machined but only the last 5 mm (inner and outer diameter). On the 3D-file all wall thicknesses of pipes, elbows, t-fittings and reductions are 2 mm. You can cast up to 3 mm ( only if necessary) This is the most complicated one. We expect 400 – 500 pcs. per/year. We have a another similar one, less difficult, same quantity: I will send it to you after clarifying the first one. The last drawing: ”Drawing 3 (Weld Butt Flange Connector): This part we will have in two dimensions: DN50 (this is the drawing) and in DN65 (I will send you the drawing next time). From both parts we need between 3.000 – 10.000 pcs. per year. We have some more of this “easy” parts (12) with similar quantity (2.500 – 10.000 pcs. per year: I will send the drawings later after clarifying the first one. The total project will run for min. 4 years, so we could have a stable business for long time. First: I need urgent a feedback whether your company is able to produce the big part. If you are able to produce it (in best case: both version (Drawing 1 and Drawing 2)) please give me your best price for moulds, material, machining and pressure test (3 bar nitrogen under water). This is important, because I will place later all parts at one company! Please give me your feedback asap! If you have any further questions feel free to contact me. In best case: via email. Then I can sent you also drawings. Best regards Norbert Norbert Fischer General Manager WITZENMANN HAMBURG GMBH Brookstieg 23 22145 Stapelfeld Tel.: + 49- (0) 40-64 55 73 - 26 Mobile: + 49- (0) 173-570 69 76 E-Mail: norbert.fischer@witzenmann.com Web: www.witzenmann-hamburg.de

  • Cast & Forged
  • Shanghai Matech Machinery Manufacture Corporation Ltd.
Germany
IP : 91.106.135.**
2019-04-24 17:11:13
Contact Info

Hello!I need:H 013/5 - in sizes std 025 and 050!

  • Cast & Forged
  • Engine Bearing,Main Bearing,Con Rod Bearing
Ukraine
IP : 193.93.48.**
2019-04-18 15:10:54
Contact Info

Dear Sir / Madam, We have an urgent enquiry for the following. Kindly advise if you have the following; Aluminium Ingots A7 99.7% Qty required: 150,000MT now and 50,000MT monthly x 12/24 months basis. Do advise if you can supply. Thanks & Best Regards, Felix LEE Midcon Design & Contracts Pte Ltd 231 Mountbatten Road #01-06 Mountbatten Centre Singapore 397999 Mobile: +65 9635 2232 Web: www.midcon.sg

  • Cast & Forged
  • oem industry TV housing aluminium ingot casting
IP : 119.74.96.**
2019-04-09 17:12:06
Contact Info

I'm very interested in your products; could you send me some detail reference information? The cost fort 20 units.

France
IP : 77.136.87.**
2019-04-08 22:43:56
Contact Info

Good afternoon We are looking to source the following materials. Can I please request a feasibility for the manufacture of the following items: 8no. 0.0.406.80 - Automatic Butt fastening set 8, bright zinc-plated 6no. 0.0.411.15 - angle bracket set 8 40x40 8no. 0.0.629.96 - multiblock D30 8no. 0.0.630.51 - adapter 8 D30 8no. 0.0.653.82 - Fastening set 8 D30 8no. 8.0.002.40 Button-head screw M6x12 bright zinc plated 6no. 8.0.002.59 Button-head screw M8x12 bright zinc plated The above items are manufactured by Item Industrietechnik. Is this something you can assist with? Kind Regards, Tim Spargo

  • Cast & Forged
  • Shanghai Matech Machinery Manufacture Corporation Ltd.
United Kingdom
IP : 109.159.224.**
2019-04-05 23:28:04
Contact Info

I'm interested in your product,if you could send me more data I appreiciate this.

  • Cast & Forged
  • scania truck spare parts - hydraulic cabin tilt cylinders
India
IP : 110.227.99.**
2019-04-04 18:56:31
Contact Info

Dear Mr. Tracy, We want to purchase 24 sets as a sample of your HU-24 feeder kit include the all accessories: kit box, motor, feeder timer, dispenser, little funnel, bracket and varmint guard as optional part. The feeders should be painted in green. If we like the product, we will order much more. Please send me shipping quote for the above quantity to Europe, Bulgaria, Sofia. Thank you! Geo Dundarov abcdef887@gmail.com +359884438400

  • Cast & Forged
  • Ningbo Ningyang Machinery Co., Ltd. ( MTT Department)
Bulgaria
IP : 87.246.16.**
2019-03-26 22:21:25
Contact Info

How many feet down goes 0.296l

IP : 172.56.30.**
2019-03-26 08:58:32
Contact Info

Dear Sir / Madam, We are pleased to introduce our firm to you, as one, engaged in representing those foreign firms, as their local agents, who want to sell their products in Pakistan Market, by taking part in the tenders from different industries. At present we have got a tender inquiry for supplying of HSCI Tubular Anode Kit, from a renowned "Gas Transmission Company", of Pakistan named ''Sui Northern Gas Pipelines Limited''. Note:- The specifications can be provided to you, if you are interested. If you are interested in supplying the above, by taking part in this tender, please inform us and we will send you the specifications sheet and some other information regarding this tender. Hoping to hear from you the soonest, we remain at your disposal

  • Cast & Forged
  • Jiaonan Haili Valve Casting Co., Ltd.
Pakistan
IP : 119.160.98.**
2019-03-21 08:20:14
Contact Info

We intend to purchase this product, would you please send me the quotation and minimum order quantity?

  • Cast & Forged
  • Magotteaux Liner Plate-Top Quality-Diaphragm(Opticontrol)
IP : 102.250.5.**
2019-03-20 18:22:34
Contact Info

Please send me the updated price and MOQ?Estoy buscando 8 de inyectores para Cummins Marino V8 modelo VT555 año 1982 de 270 hp serie motor 20216050. > El numero de pieza 3275767> Si tienen en stock por favor enviar cotización, con entrega en Miami Pompano Beach, yo lo compro desde Argentina mediante Pay-pal, gracias

Argentina
IP : 181.27.151.**
2019-03-20 07:00:02
Contact Info

Здраствуйте
Ecu kit 3d power 4cyl 10штук 6cyl 10 штук надо
Инжектора почем у вас?
Ян Шелли жду вас ватсапе

Kazakhstan
IP : 149.27.200.**
2019-03-17 09:50:02
Contact Info

Dear Sirs, We ask for your quotation for the following, namely: 1 PC. ROTOR with a total weight of approx. 10,5 t according to the att. drawing no. 10578/4111, consisting of: 1 PC. SHAFT = Pos. 1, Mat. 34CrNiMo6 1 PC. NUT = Pos. 6, Mat. Ck 45 32 PCS DISKS = Pos. 9, Mat. St 37.2 For sake of completeness we also send the assembly drawing no. 10578/4112 (see page no. 2). Please be kind and announce your price per each position. Assembly of positions 1, 5, 6 and 9 to one unit. Conservation with TECTYL. Material certificates according to EN 10204-3.1. Chemical properties for all items, US testings, Certificate acc. to EN10204-3.1 and dimensional reports. DEADLINE: 19.03.2019 We look forward to your offer FCA Ratingen/Germany. Best Regards / Mit freundlichen Grüßen SGS GmbH Marc

  • Cast & Forged
  • 34CrNiMo6 Hot Forging Steel Shaft
Germany
IP : 84.60.143.**
2019-03-14 19:52:42
Contact Info
Show
12|
24|
36
  • Go