Inquiry about IS/ISR series end suction centrifugal horizontal floating water pump

Dear Sales,

I hope that you are doing great.

Please note that we have a requirement for some products. We wanted to buy these products on an urgent base. Please check our attached requirements and share your best-discounted prices at your earliest to proceed ahead. 

Sr No	Description	Acc Unit	Quantity Required
3	Centrifugal and Vacuum pump without motor	 	 
3.1	Centrifugal pump without motor, Model: ISR 50-32-160, Material Cast iron. Inlet/outlet: 50/32, Type: Flange, Flow rate: 12.5m3/hr, Head: 32m, Power: 3KW, Hot water temperature ≥90C	No	2
3.2	Model: ISR 50-32-160, Material Cast iron. Inlet/outlet: 50/32, Type: Flange, Flow rate: 12.5m3/hr, Head: 32m, Power: 3KW, Hot water temperature 290C, Spares of centrifuge pump without motor,	 	 
3.2.1	Mechanical Seal	No	10
3.2.2	Oil Seal	No	24
3.2.3	Shaft	No	2
3.2.4	Metallic coupling	Pair	4
3.2.5	Impeller	No	2
3.3	Centrifugal Pump without motor, Model: IS100-65-200, Material: HT200 inlet/outlet: 100/65 mm, Type: flange, Flow rate: 100m3/h, Head: 50m , Power: 22 KW	No	2
3.4	Spares of centrifugal pump,, Model: IS100-65-200, Material: HT200 inlet/outlet: 100/65 mm,, Flow rate: 100m3/h, Head: 50m ,Power: 22 KW	 	 
3.4.1	Mechanical seal, Material SS304, rubber graphite	 	24
3.4.2	Shaft	No	2
3.4.3	Oil seal	No	24
3.4.4	Metallic coupling	pair	6
3.5	Magnetic coupled centrifugal pump with motor. Model: IMC 50-32-160, Flow rate: 12.5m3/h, Head: 32m, NPSH: 2m, Power rating: 4 Kw, Motor Ex-proof, Class: dllbt4, Volt: 380, Motor RPM: 2890, IP rating: 44, Frequency: 50Hz,	No	2
3.6	LPG and Butadiene pump Model: YQB15-5 flow capacity: 15m3/h, Pressure differential: 5kgf/cm2, Pump rotation speed: 750 RPM, with ex-proof motor dllbt4, Motor power: 5.5KW, Inlet & outlet diameter: Ø 50 mm	No	2
3.6.1	Mechanical seal Butadiene pump model: YQB15-5	No	6
3.7	Rotary Vane Vacuum pump without motor	 	 
3.7.1	Model: 2x 70A, Ultimate pressure: 6x10^-2 Pa, Material CS, Motor power: 5.5 KW	No	2
3.7.2	Model: 2x 30A, Ultimate pressure: 6x10^-2 Pa, Material CS, Motor power: 3.0 KW	No	4
We are looking forward to your positive and prompt response.